These stickers come in 3 size ranges, starting from 300mm to a whopping 1200mm!
Our non-slip floor vinyl is supplied with a permanent adhesive backing to make sure that once they are up, they don't budge!
HOW IT WORKS
Simply upload your artwork, provide an email address for proofing purposes, choose a size range and if required enter a specific size within that range. We will then get back to you within 2 working days with a proof of the design for you to sign off on before we go ahead with production.
DON'T HAVE ARTWORK?
Not a problem, that's why we have a free design service.
Just contact us on chat or email us at
[email protected] with your ideas and we will get back to you within 2 working days.
MATERIAL SPECIFICATIONS
Suitable for indoor use. Must be applied to a smooth surface, adhesive results may vary for textured flooring.
This vinyl has a non-slip texture. This texture will wear over time and will require replacement.
APPLICATION
You will need a squeegee to apply this product for best results.
You may want to prep the area first to remove dirt and dust. Using masking tape and a spirit level to ensure the sticker is applied straight is also a good idea.
Start by peeling the top part of the sticker from the backing. Apply to the floor and smooth down with a clean palm or squeegee. Begin peeling the backing off from underneath smoothing down as you go. Keep going until you get to the bottom of the sticker ensuring you work out any bubbles as you go. Work out any remaining bubbles with a clean palm or squeegee.